hydro power / Energy

Hydropower, hydraulic power or water power is power that is derived from the force or energy of moving water, which may be harnessed for useful purposes.

Prior to the widespread availability of commercial electric power, hydropower was used for irrigation, and operation of various machines, such as watermills, textile machines, sawmills, dock cranes, and domestic lifts.Another method used a trompe, which produces compressed air from falling water, which could then be used to power other machinery at a distance from the water.

history

Hydropower has been used for hundreds of years. In India, water wheels and watermills were built; in Imperial Rome, water powered mills produced flour from grain, and were also used for sawing timber and stone. The power of a wave of water released from a tank was used for extraction of metal ores in a method known as hushing. Hushing was widely used in Britain in the Medieval and later periods to extract lead and tin ores. It later evolved into hydraulic mining when used during the California gold rush.

In China and the rest of the Far East, hydraulically operated "pot wheel" pumps raised water into irrigation canals. In the 1830s, at the peak of the canal-building era, hydropower was used to transport barge traffic up and down steep hills using inclined plane railroads. Direct mechanical power transmission required that industries using hydropower had to locate near the waterfall. For example, during the last half of the 19th century, many grist mills were built at Saint Anthony Falls, utilizing the 50-foot (15 m) drop in the Mississippi River. The mills contributed to the growth of Minneapolis.

Natural manifestations

In hydrology, hydropower is manifested in the force of the water on the riverbed and banks of a river. It is particularly powerful when the river is in flood. The force of the water results in the removal of sediment and other materials from the riverbed and banks of the river, causing erosion and other alterations.

Modern usage

There are several forms of water power currently in use or development. Some are purely mechanical but many primarily generate electricity. Broad categories include:
1)   Waterwheels, used for hundreds of years to power mills and machinery
2)   Hydroelectricity, usually referring to hydroelectric dams, or run-of-the-river setups (eg hydroelectric-powered watermills)
3)     Damless hydro, which captures the kinetic energy in rivers, streams and oceans
4)    Vortex power, which creates vortices which can then be tapped for energy
5)    Tidal power, which captures energy from the tides in horizontal direction
6)    Tidal stream power, which does the same vertically
7)    Wave power, which uses the energy in waves
8)    Osmotic power, which channels river water into a container separated from sea water by a semipermeable membrane.
9)    Marine current power which captures the kinetic energy from marine currents.
10) Ocean thermal energy conversion which exploits the temperature difference between deep and shallow waters.

Hydroelectric power now supplies about 715,000 megawatts or 19% of world electricity[1]. Large dams are still being designed. The world's largest is the Three Gorges Dam on the third longest river in the world, the Yangtze River. Apart from a few countries with an abundance of hydro power, this energy source is normally applied to peak load demand, because it is readily stopped and started. It also provides a high-capacity, low-cost means of energy storage, known as "pumped storage".

Hydropower produces essentially no carbon dioxide or other harmful emissions, in contrast to burning fossil fuels, and is not a significant contributor to global warming through CO2.

Hydroelectric power can be far less expensive than electricity generated from fossil fuels or nuclear energy. Areas with abundant hydroelectric power attract industry. Environmental concerns about the effects of reservoirs may prohibit development of economic hydropower sources.

The chief advantage of hydroelectric dams is their ability to handle seasonal (as well as daily) high peak loads. When the electricity demands drop, the dam simply stores more water (which provides more flow when it releases). Some electricity generators use water dams to store excess energy (often during the night), by using the electricity to pump water up into a basin. Electricity can be generated when demand increases. In practice the utilization of stored water in river dams is sometimes complicated by demands for irrigation which may occur out of phase with peak electrical demands.

Not all hydroelectric power requires a dam; a run-of-river project only uses part of the stream flow and is a characteristic of small hydropower projects. A developing technology example is the Gorlov helical turbine.

Small scale hydro power

Small scale hydro or micro-hydro power has been increasingly used as an alternative energy source, especially in remote areas where other power sources are not viable. Small scale hydro power systems can be installed in small rivers or streams with little or no discernible environmental effect on things such as fish migration. Most small scale hydro power systems make no use of a dam or major water diversion, but rather use water wheels.

There are some considerations in a micro-hydro system installation. The amount of water flow available on a consistent basis, since lack of rain can affect plant operation. Head, or the amount of drop between the intake and the exit. The more head, the more power that can be generated. There can be legal and regulatory issues, since most countries, cities, and states have regulations about water rights and easements.

Over the last few years, the US Government has increased support for alternative power generation. Many resources such as grants, loans, and tax benefits are available for small scale hydro systems.

In poor areas, many remote communities have no electricity. Micro hydro power, with a capacity of 100 kW or less, allows communities to generate electricity. This form of power is supported by various organizations such as the UK's Practical Action.

Micro-hydro power can be used directly as "shaft power" for many industrial applications. Alternatively, the preferred option for domestic energy supply is to generate electricity with a generator or a reversed electric motor which, while less efficient, is likely to be available locally and cheaply.

Resources in the United States

There is a common misconception that economically developed nations have harnessed all of their available hydropower resources. In the United States, according to the US Department of Energy, "previous assessments have focused on potential projects having a capacity of 1 MW and above". This may partly explain the discrepancy. More recently, in 2004, an extensive survey was conducted by the US-DOE which counted sources under 1 MW (mean annual average), and found that only 40% of the total hydropower potential had been developed. A total of 170 GW (mean annual average) remains available for development. Of this, 34% is within the operating envelope of conventional turbines, 50% is within the operating envelope of microhydro technologies (defined as less than 100 kW), and 16% is within the operating envelope of unconventional systems. [3] In 2005, the US generated 1012 kilowatt hours of electricity. The total undeveloped hydropower resource is equivalent to about one-third of total US electricity generation in 2005. Developed hydropower accounted for 6.4% of total US electricity generated in 2005.

Environmental impacts

Hydro-powered electricity, however is not without its drawbacks. In addition to the significant threat that dams pose to fish populations and the ecosystems of rivers and streams, hydropower can negatively impact both the flow and quality of water. Lower levels of oxygen in the water can present a threat to animal and plant life . However, these issues can be addressed if fish ladders are put in place to ensure safe passage around the area, and the water is aerated on a regular basis to maintain adequate oxygen levels safe for animal and plant life . The flow of water should be monitored closely to prevent the ecological dangers associated with over-stressing bodies of water. These dangers can easily be avoided by shutting down pumping operations temporarily to allow balance to return to damaged ecosystems.